b) Connecting to computer / time setting /
webcam
• Remove the crown (7) and connect the USB cable to the video
watch and your computer.
• The video watch is recognised as an external disk and you can
view or edit the captured videos and photos.
Do not operate the video watch when connected to a
computer.
• If the connection fails, first remove the USB cable from the
computer and the video watch.
• Then reset the video watch. To perform the reset function, press
the on/off button (2) and the mode button (8) simultaneously.
The product will reset and then turn off.
Also, use the reset function if a recording is not
performed correctly.
• Re-establish the USB connection to the computer.
• In the video watch directory you will find the Photo, Record,
Video folders and the text file time.txt. The recordings are
saved in the corresponding folders.
• Open the text file time.txt to set the date and time. When
recording video, the entered date and time appear.
• The time format is displayed as follows:
Year.month.day Hours:minutes:seconds
Example: 2018-11-28 18:08:08
29