Hama 137291 Bedienungsanleitung Seite 2

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and
Notes
Note
This symbol is used to indicate additional
information or important notes.
2. Explanation of product marking symbols
The product is intended for indoor
use only.
3. Package Contents
• 1 x „Premium" Universal Thermostat
• This operating instruction
4. Safety Notes
• The product is intended for private, non-
commercial use only.
• The product is intended for indoor use only.
• Protect the product from dirt, moisture and over-
heating, and only use it in a dry environment.
• Keep this product, as all electrical products, out
of the reach of children!
• Do not operate the product outside the power
limits given in the specifications.
• Connect the product only to a socket that has
been approved for the device. The socket must
be installed close to the product and must be
easily accessible.
• Lay all cables so that they do not pose a tripping
hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to
any major shocks.
3
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not continue to operate the device if it
becomes visibly damaged.
• The product is voltage-free only when unplugged.
Do not connect multiple products in series.
• Devices with electronic power supplies (for exam-
ple, televisions or high-voltage LED lights) do not
constitute resistive loads. They can generate in-
rush currents of over 100 A. The switching of such
loads leads to premature wear of the actuator.
5. Introduction
The Universal Thermostat can be used universally
in almost all areas where temperature regulation
in heating or cooling is required. It switches
connected devices (such as fans, fan heaters,
terrariums) on or off, depending on the measured
temperature. The switch-on and switch-off
temperatures can be easily set via digital
display. The choice of switch-on and switch-off
temperatures allows an air conditioning unit or a
heating unit to be controlled in different ways. The
set temperatures are stored, even if the device is
unplugged or the mains power cuts out (14-day
backup memory).
6. Getting Started
• Place the temperature sensor in the location where
the temperature is to be measured. If necessary,
fasten the sensor to the location with a cable tie.
Note
The temperature sensor is not suitable for use
in liquids over long periods.
• Plug the Universal Thermostat into a standard
wall socket. Now connect the device (heating or
cooling appliance) to the Universal Thermostat.
• After connection, the Universal Thermostat
performs a short self-test and is then in
automatic mode.