Trouble Shooting - Klarstein 10004236 Benutzerhandbuch

8: USB mode
After finished capture, please take out the memory card from the film & photo
scanner to download the stored images from the memory card.
When the device is connected with USB cable to PC, User can also press
MODE button to main menu, then press LEFT/RIGHT button to select USB
mode, then press ENTER button to confirm, the film & photo scanner will
become a mass storage device and user can review or edit images on PC.
User can also press MODE button to back to main menu.

8: Trouble shooting

Question: There is unwanted stripe appearance at the edge of the image.
Answer: If it is slight stripe, move the slide holder gently to and fro in the
device until the stripe is no longer visible in the preview window.
If the stripe is still, please contact with our retailer.
Question: The device cannot connect to the computer.
Answer: Please check if the cable has already connected to the USB port
of the computer. Or connect the cable to another USB port. It is
recommended that connect it to the motherboard directly, not to
the front panel.
Turn on the power button, enter USB mode, it acts as a mass
storage device.
26