Technical Data - Blaupunkt BT UP Bedienungsanleitung

Technical data

Bluetooth Specifi cation Version 3.0
Supported Bluetooth profi les A2DP
Frequency Range 2.4-2.48GHz ISM band
Bluetooth Range Up to 10 metres(Class 2)
Rated Operation Power External DC 12V
Weight Approx 8g(not incl. cable)
Dimensions H x L x D mm 46x30x10.5 mm
BT UP Bluetooth® Audio Receiver Overview
3
Rated Voltage: DC12V
1 2 4
5
Indicator
Power Button
Power cable
3.5mm Audio output cable
RCA extension audio cable
8
01_BT_UP_Content.indd 8-9 01_BT_UP_Content.indd 8-9
Red (+)
Black (-)
About the Power Supplier
The BT UP powered by external power supplier, it should connect to 12V DC
power before use.
Pairing to your Bluetooth® phone
Before you use BT UP the fi rst time, you must pair with a Bluetooth® host audio
devices such as Mobile phone, Note book, or media player, etc. Pairing is a
one-time process and required only for the fi rst connection. Please follow the
instruction to pair with a Bluetooth® enabled mobile phone.
1. When the power supplier is available, BT UP will turn on automatically,
then enter pairing mode, the indicator intermittently fl ashes red and blue.
2. Find the Bluetooth® setting of your cell phone and start the search for
Bluetooth® devices. (For further details, please read the operating instruc-
tions of your cell phone).
3. From the list of devices found, select the "BT UP".
4. If required, enter the PIN code "0000" and confi rm the entry. If the pairing
process was successful, The indicator change to fl ash blue.
5. After pairing, the BT UP automatically connect with the cell phone. Once
paired, the device will change to standby mode and the indicator light
will fl ash blue 2 times every 5 seconds.
Important:
– Press and hold MFB for 2 seconds to turn BT UP on if it was turned off by
manually or automatically.
– Every time when the BT UP is disconnect from host devices, it will enter
pairing mode automatically.
– If pairing is not completed within 2 minutes, the BT UP will turn off .
Connecting to a Bluetooth® phone
If BT UP has completed the pairing process successfully, it will connect to
the phone you last connected automatically while it turns on. Please ensure
your phone's Bluetooth® function is active. Otherwise, you can connect the
device from your phone.
9
04.07.13 13:42 04.07.13 13:42