Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Video recording when powered by a USB power supply
a) Turning the camera on/off
•
Insert the memory card into the table clock, if you have not done it yet.
•
With the on/off switch (4) you can switch the camera on („ON") or off („OFF").
b) Connecting to USB power
Connect the microUSB connector to a USB port (output voltage 5 V/DC, min.1 A) with the USB cable
enclosed. The blue LED (7) flashes while the battery is charging. Once the rechargeable battery is fully
charged, the blue LED (7) burns steady.
Do not connect the table clock to a computer but use a USB power supply unit. Otherwise video
recording will not be available.
c) Start/stop video recording
•
Briefly press the „ " (8) button.
•
Briefly press the „1" button (9) on the table clock or the „B" button (24) on the remote control. The blue
LED (7) turns off and the red LED (6) goes on. The clock is in video mode.
•
Briefly press the „1" button (9) on the table clock or the „B" button (24) on the remote control to start
video/audio recording. The red LED (6) flashes briefly 3x to check and then turns off.
The table clock will store a new file on the memory card every 10 minutes. Longer recordings are
thus stored in several parts.
If the memory card is full, the oldest recordings will be overwritten.
•
To stop recording, briefly press the „1" button (9) on the table clock or the „B" button (24) on the remote
control. The red LED is steady (standby in video mode). You can now start a new recording with the
button „1" (9) on the table clock or the button „B" (24) of the remote control.
The video mode exits after a few seconds and the red LED turns off. If this is the case, first
activate the video mode by briefly pressing the „ " button (8) on the table clock as described
above.
Displaying date and time in pictures/video
•
Connect the table clock via the supplied USB cable, to a 2.0/3.0 USB port on your computer. The operat-
ing system (windows) will recognise the new hardware and install the appropriate drivers automatically.
•
If connected to a computer, the table clock will automatically generate a text file („time.txt") on the mem-
ory card with the following contents:
2015-01-01 23:59:59 Y
This is the date (format YYYY-MM-DD = year - month - day) and (after a space) the time (format HH:
MM: SS = hour: minute : second).
The letter Y or N follow next (after a space). The letters stand for:
Y = display date and time in pictures/videos
N = do not display date and time in pictures/videos
•
Enter the date and the time. By selecting the appropriate letter you can choose whether date and time
should be displayed or not. Save the text file.
•
Disconnect the USB from the computer.
You must again set date and time in the text file the next time you connect the table clock to a
computer.
Maintenance and cleaning
The product is maintenance-free for you; you should never take it apart (except for inserting or replacing
the batteries as described in these operating instructions). Servicing or repair may only be carried out by a
specialist.
Use a clean, dry, soft cloth for cleaning. Do not use aggressive cleaning agents as these can cause discol-
ouration.
Disposal
a) Product
Electronic devices are recyclable and do not belong in the household waste. Dispose of an
unserviceable product in accordance with the relevant statutory regulations.
Remove any inserted batteries/rechargeable batteries and dispose of them separately from the
product.
b) Primary batteries and secondary batteries
As an end user, you are required by law (battery ordinance) to return all used batteries and rechargeable
batteries; it is not permitted to dispose of batteries with normal household waste.
Batteries/rechargeable batteries containing hazardous substances are labelled with these sym-
bols to indicate that their disposal in household waste is forbidden. The designations for the
heavy metals involved are: Cd = cadmium, Hg = mercury, Pb = lead.
Used batteries, rechargeable batteries and coin cells can be returned to collection points in your municipality,
our stores or wherever batteries/rechargeable batteries/coin cells are sold.
That way you fulfil your statutory obligations and contribute to the protection of the environment!
Declaration of Conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product
conforms to the 2014/53/EU directive.
The full text of the EU conformity declaration is available via the following Internet address:
www.conrad.com/downloads
Select a language by clicking a flag symbol and enter the order number of the product in the
search field; then you will be able to download the EU declaration of conformity in PDF format.
Technical data
a) Table clock
Power supply ........................................ 1x Li-Ion battery, type, rated voltage 3.7 V,
capacity 2000 mAh
Charging time ....................................... approx. 5 hours
Battery life ............................................ approx. 7 h
Power consumption .............................. max. approx. 160 mA (video recording)
max. approx. 30 mA (time display)
Sensor .................................................. CMOS, 1280 x 720
Video resolution .................................... 1920 x 1080, AVI, 30 picture/s approx. 130 MB/min
(depends on picture contents)
Picture resolution .................................. 2560 x 1440, JPEG
Camera detection angle ....................... 75° horizontal, 75° vertical
IR LEDs ................................................ 6
IR range ................................................ max. 3 m
Time display ......................................... 12h/24h toggle
Alarms .................................................. 3 (can be switched on and off)
Suitable memory card ........................... microSD/microSDHC, max. 32GB
Ambient conditions ............................... Temperature -20 °C to +50 °C, relative air humidity 0% to 90%, not
condensing
Dimensions ........................................... 103 x 44 x 47 mm (W x D x H)
Weight .................................................. approx. 139 g (incl. battery)
b) Remote control
Power supply ........................................ 1x battery, CR2032
Frequency band .................................... 2437.18 to 2442.52 MHz
Transmission power.............................. -6 dBm
Transmission range .............................. up to 10 m (free field)
Ambient conditions ............................... Temperature -20 °C to +50 °C, relative air humidity 0% to 90%, not
condensing
Dimensions ........................................... 58 x 32 x 12 mm (L x W x H)
Weight .................................................. approx. 14 g (incl. battery)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2019 by Conrad Electronic SE.
1882082_V4_0719_02_m_VTP_en
Werbung
