Operating Method / How To Use - PLABEAU S1 Benutzerhandbuch

02 Operating method / How to use

Operating method of PLABEAU
PLABEAU can be turned ON/OFF by pushing
the power button on the side of the unit.
When PLABEAU is turned on for 10 minutes, a blue LED
!
light flickers, indicating that the device has stopped
generating plasma. The blue LED light also indicates the
recommended time of use.
When red LED flickers, charge the unit by
connecting the charging cable to the main body.
Red LED will be turned on during charging and
the device will not operate. Green LED light turns
on when battery is fully charged.
PLABEAU product has built-in rechargeable battery and
!
can be used 4~5 times (approximately for 1 hour) on a
wide range of areas with a single charging.
22
How to use PLABEAU 1
STEP 1
Please completely wash your face and other
areas of the skin you intend to apply
PLABEAU on. If the residue of make-up and
other cosmetic products are left on the skin,
Power source LED
it may reduce the efficacy of the device.
Please make sure to use PLABEAU when
Power button
(ON/OFF)
your skin is completely dried.
If water is left on the skin, it may cause a stinging
!
sensation. Please use this product after your skin is
completely dried.
STEP 2
How to use PLABEAU 2 How to use PLABEAU 3
Please apply moisturizers on your skin after the
Please scan and massage the device on your
skin while holding onto the grip section of use of PLABEAU.
Before applying the moisturizers, you can clear
the device. If you want more intensive care
up your skin texture by lightly washing off face
hold PLABEAU on areas you intend to focus
or applying toner over your face.
on for 5 to 10 seconds.
We recommend applying the device for 10 minutes a
!
day. Depending on your skin sensitivity, the level of
stinging you experience may be different. If you have
sensitive skin, start by using the device for 2 to 3
minutes and incrementally increase usage of the
device.
When plasma is generated, a blue LED light will turn
!
on. It is normal to hear noises and smell a metallic odor
as these are all byproducts of generating plasma.
How to use PLABEAU 4
After the use of PLABEAU, sebum and skin
impurities may remain on the plasma ceramic
pad. We recommend keeping the plasma pad
clean by regularly swiping it with alcohol and
a cotton pad after use.
23