Security Advices - Chal-Tec 10006447 Anschluss- Und Anwendungshinweise

 Two quality drives with high-class laser units.
 Separate controllers for each drive including complete functional range.
 Permanent display of runtime, balanced time and duration of a title.
 Loop function for repeating sequences, cue function, pitch control, skip- and search function.

The circuit of this device is overload protected.
 Before using the device, please check it for any possible damages. In case of damage do not
operate it.

Unplug the device if you do not use it for a certain time.

The device may not become subject of mechanical stress and should not be exposed to humidity.

To be considerate of the ventilation do not cover the device and protect it from direct solar
radiation.

Clean the device with a dry and soft cloth only.
 Caution! Should the device itself get damaged, please let the repair to the manufacturer or to a
qualified service agent.
 Please dispose packaging materials properly and do not let play children with it.

The device itself is no toy either. Do not let children play with it too.
Control Unit:
1. JOG wheel - Function during playback: The JOG wheel can be used to increase (clockwise
rotation) or reduce (anti-clockwise rotation) the playback speeds temporarily by +/-16%. The CD
is played at its original speed as soon as the wheel is no longer moved.
Function in pause mode: The appliance switches to "stutter mode" (continuous repetition of a
small section of the CD) if the JOG wheel is used in pause mode. You can move backwards and
forwards step-by-step within a CD track with the JOG wheel. This makes it easier to find specific
certain playback points (e.g. the CUE mark).
2. LC display
3. PITCH-side control:The playback speed can be changed with the side control. Push the control
downwards (position +) to increase the playback speed. The spee d is reduced by pushing the
control upwards (position -). In the central position, you can slightly feel the slide control clicking
into place. The original playback speed and tone pitch are reproduced in this position.
4. LOOP-In button: The starting point of the playback loop is set by pressing this button.
Capability Characteristics

Security Advices

Overview