oneConcept IceCube Bedienungsanleitung Seite 19

3
Fill the water tank with clean, cool
(not cold) water. We recommend
using distilled water if you live in
a hard water area. Never use any
additive or place essential oils into
the water.
5
Place the tank into the unit, making
sure the tank is firmly seated. Water
will begin to transfer into the water
reservoir.
4
Replace the tank cap by turning
clockwise until tight. Do not over
tighten.
6
Once the water stops emptying
into the water reservoir, remove the
water tank and repeat steps 2-5 to
fully fill the water tank and reservoir.
EN
19