Reverse Door - Klarstein Springfield Bedienungsanleitung

REVERSE DOOR

You need: Phillips screwdriver, flat-bladed screwdriver, Allen wrench.
Important information
• Make sure the device is unplugged and empty.
• To remove the door, the device must be tilted backwards.
• You should set the unit on something firm so that it does not slip when tilted.
• All removed parts must be kept for reinstallation of the door.
• Do not lay the unit flat, as this can damage the cooling system.
• It is better if 2 people hold the device during installation.
Door rotation
1
Remove the cover screws and remove
the cover.
2
Loosen the screws and remove the upper
hinge.
EN
13