Charging A Mobile Device; C) Video Recording And Motion Detection - Sygonix 1882365 Bedienungsanleitung

b) Charging a mobile device
• Check the battery level before charging a mobile device. To do
this, press the K2 button (12).
• Connect the USB-A plug of the USB cable to the USB-A port (9).
• Connect the Micro USB plug of the USB cable to the Micro
USB port of your mobile device. The charging process
commences automatically.
• The LEDs of the battery level indicator (1) glow steadily during
charging. The current battery level is indicated by the number
of lit LEDs.
• Disconnect the USB cable from the connected device to stop
or interrupt charging. As soon as charging of the connected
mobile device has been completed or the USB cable has been
disconnected, the battery level indicator will go off.

c) Video recording and motion detection

You can record a video while the internal rechargeable
battery is being charged.
• The product is equipped with 2 infrared LEDs (3, 5) that enable
video recording (up to approx. 3 m) in the dark. The recordings
are black and white in darkness. The infrared LEDs turn on
automatically in the dark.
• The product has no internal memory. It is therefore necessary
to use a memory card to store recordings. A microSD card is
not included. The product supports microSD cards from 8 GB
to 128 GB.
30