Maintenance - Tecknet Bluetek iEP300 Benutzerhandbuch

Battery Capacity Indicator & LED Light Switch
The LED power indicators provide information about
the battery charging status and battery level: Press the
Switch Button once check power level, the LED will be
illuminated for 5 seconds.
Status of LED light
The green light is illuminated
The green light flickers
The yellow light flickers
The red light flickers
LED Torch
The LED Torch is located at the top of the Power
Bank.
Double-click the button to turn the torch on.
Double-click again for the SOS mode - the torch emits
three long and three short SOS signals.
Double-Click a third time turns the torch off.

Maintenance

In order to maximize battery life, we recommend you
maintain the BLUETEK™ iEP300 Power Bank as
follows:
1. Re-charge your BLUETEK™ iEP300 Power Bank
once every 3 months if it has not been in use.
2. Keep your BLUETEK™ iEP300 Power Bank dry
and away from moist or corrosive materials.
3. Do not clean the BLUETEK™ iEP300 Power Bank
with harsh chemicals, soaps or detergents.
Package Contents
- 1 X BLUETEK™ iEP300 Power Bank
- 1 X USB Cable
- 1 X User Manual
- 1 X Lanyard
Capacity percent
=100%
60-100%
30-60%
≤30%
3