Herunterladen Inhalt Inhalt Diese Seite drucken

Service & Maintenance - Triton TA1200BS Gebrauchs- Und Sicherheitsanweisung

Vorschau ausblenden Andere Handbücher für TA1200BS:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26
SERVICE & MAINTENANCE
GENERAL INSPECTION
• Regularly check that all the fixing screws are tight.
• The supply cord of the tool and any extension cord
used should be checked frequently for damage. If
damaged, have the cordset replaced by an authorised
service facility. Replace the extension cord if
necessary.
CLEANING
1. Keep the tool's air vents unclogged and clean at all
times.
2. Remove dust and dirt regularly. Cleaning is best
carried out with a soft brush or a rag.
3. If the body of the sander needs cleaning, wipe it with
a soft damp cloth. A mild
detergent can be used but
nothing like alcohol, petrol or
other cleaning agent.
4. Never use caustic agents to
clean plastic parts.
WARRANTY
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless
indicated otherwise) for information on future releases.
Details provided will not be made available to any third party.
PURCHASE RECORD
Date of Purchase:
___ / ___ / ____
Model: TA1200BS
Serial Number: __________________
Retain your receipt as proof of purchase
Water must never come into contact with the
sander.
CHANGING THE BELT
1. Using a cross headed screwdriver remove the screw
holding the Drive Belt Cover
(5) in place.
2. Remove the worn belt by
easing it off the bottom
larger drive pulley, and then
lift away.
3. Clean all the dust and debris
away.
4. Place new drive belt over the top drive pulley and push
onto the larger pulley, rotate the belt until it is on both
pulleys located in the grooves of each pulley.
5. Place the drive belt cover back on
and screw the fixing screw tight.
Triton Precision Power Tools guarantees to the
purchaser of this product that if any part proves to
be defective due to faulty materials or workmanship
within 12 MONTHS from the date of original
purchase, Triton will repair, or at its discretion
replace, the faulty part free of charge.
This guarantee does not apply to commercial use
nor does it extend to normal wear and tear or
damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights
Service & Maintenance / Warranty
GB
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis