Troubleshooting - Profiline Ypl 183-2 Kit Originalbetriebsanleitung

Troubleshooting

Fault Possible cause
The compressor does • No supply voltage.
not start.
• Insuffi cient supply voltage.
• Outside temperature is too low.
• Motor is overheated.
The compressor • The non-return valve leaks.
starts but there is no
pressure. • The seals are damaged.
The compressor starts, • The hose connections have a leak.
pressure is shown on
the pressure gauge, • A quick-lock coupling has a leak.
but the tools do not
start.
Remedy
• No supply voltage.
• Insuffi cient supply voltage.
• Outside temperature is too low.
• Motor is overheated.
• The non-return valve leaks.
• The seals are damaged.
• The hose connections have a leak.
• A quick-lock coupling has a leak.
GB 19 19