Operating Information - clearaudio electronic smart power 12V Bedienungsanleitung

User manual / Bedienungsanleitung

4. Operating information

• As long as a load is connected to the
for operation of the connected device there will be no charging.
• A reduction of the output voltage of up to 4V between two charging cycles is normal.
Crucial for the correct speed of the turntable is a noise free current and not the absolute value.
This is ensured by battery-buffering and a special, linear regulation in the turntable.
• Switching off the unit is done using the power switch on the rear side of the
• By turning the knob on the back, the light of the LED ring on the front can be dimmed in all
operating modes.
Pic. 1: Rear view
Please note:
To prevent overheating of electronic parts never cover or put anything on top of the
smart power 12V
.
Do not dispose the unit in the domestic waste.
smart power 12V
Do not expose the
6
smart power 12V
to a temperature above 40° Celsius.
Clearaudio electronic GmbH
Spardorferstraße 150
91054 Erlangen
Germany
Phone: +49 9131 40300100
Fax: +49 9131 40300119
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
and the remaining charge level is sufficient
© clearaudio electronic GmbH, 2019-07
smart power 12V
.