Protecting The Environment - Black&Decker BDSL301 Bedienungsanleitung

High and low brightness switch (fig. D)
To extend the run time of the spotlight the unit is fitted with a
brightness switch (2).
Slide the switch (2) forward towards the bulb to set the
spotlight on high beam.
Slide the switch (2) to the rear to set the spotlight on low
beam (extended run time).
Using the built-in carry lanyard
The carry lanyard (4) may be used to store or carry the
spotlight. Adjust the slide on the cords to keep the
lanyard secure around the supporting object.
Maintenance
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance or cleaning
on the appliance, unplug the appliance.
From time to time wipe the appliance with a damp cloth.
Do not use any abrasive or solvent-based cleaner. Do
not immerse the appliance in water.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your appliance needs
replacement, or if it is of no further use to you, think of the
protection of the environment. Black & Decker repair agents
will accept old Black & Decker tools and ensure that they are
disposed of in an environmentally safe way.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard
batteries with due care for our environment:
Do not short-circuit the battery terminals.
Do not dispose of the battery in fire, as this may result in
an explosion.
Be aware that the battery is heavy.
Run the battery down completely, then remove it from
the appliance.
NiCd, NiMh, Lithium Ion and Lead Acid (Pb) batteries
are recyclable. They must not be disposed of with
household waste. Place the battery in suitable
packaging to ensure that the terminals cannot be short-
circuited. Take the battery to any authorised repair
agent or a local recycling station
Technical data
Input voltage Vdc 12
Input current mA 300
(max)
Unit weight kg 1.0
Runtime high min 17
Runtime low min 24
Battery Type 6 V 3 Ah SLA
Bulb Type 6 V H3 35/25 W
halogen
lm 300
Light Intensity
Charger
Input Vac 230
Approx. h 18 - 24
charging time
Weight kg 0.2
ENGLISH
BDSL301 BDSL302
12
300
1.5
18
25
12 V 3 Ah SLA
12 V H3 55/35 W
halogen
760
230
18 - 24
0.2
5