Bluetooth Connection - Hama Fun 70 BT Bedienungsanleitung

6. Operation
Note
• The functions described in this
section are only available for
Bluetooth-capable terminal devices.
• Note that the max. range of
Bluetooth without any obstacles
such as walls, people, etc. is
10 metres.

6.1. Bluetooth connection

Note - Pairing
• Make sure that your Bluetooth-
capable terminal device is on and
Bluetooth is activated.
• Make sure that your Bluetooth-
capable terminal device is visible for
other Bluetooth devices.
• For more information, please refer
to the operating instructions of your
terminal device.
4
• Press and hold the ON/OFF switch for
about 3 seconds.
• The status LED (2) begins to flash
blue. This means the Bluetooth remote
release is searching for a Bluetooth
connection.
• This means the Bluetooth remote
release is searching for a Bluetooth
connection.
• Open the Bluetooth settings on your
terminal device and wait until
hama Selfie Fun appears in the list of
Bluetooth devices found.
• Select hama Selfie Fun and wait until
hama Selfie Fun is listed as connected
in the Bluetooth settings on your
terminal device. The status LED (2)
glows blue.
Note - automatic connection
and possible problems
After the devices have been paired
once, the connection is then
established automatically. If the
Bluetooth connection is not established
automatically, check the following: