1: Safety Precautions - Braun NovoScan 3in1 Bedienungsanleitung

1: Safety precautions

Important:
Caution:
Ventilation:
Heat:
Cleaning:
Non use period:
USB overloading: Do not overload the USB connections on your
Servicing:
Film Holder:
1
Do not expose this product to rain or moisture to
preserve the life of your product.
Do not disassemble this unit. To prevent the risk of
electric shock, do not remove cover.
The device should be situated so that its location
or position does not interfere with its proper
ventilation. For example, the unit should not be
situated on a bed, sofa, rug or similar surface that
may block the ventilation openings.
The device should be situated away from sources
of high heat such as radiators or stoves.
We strongly suggest using a clean, dry, non-alcohol
cotton swab to clean the glass surface periodically
to produce a clear image.
The USB cord for the device should be unplugged
from the computer when the unit is left unused for a
long period of time.
computer. If you have too many devices connected
to your computer such as a wireless mouse,
media player, mobile phone or other USB powered
devices. There may not be enough power for the
film & photo scanner to operate properly.
The user should not attempt to service the device
beyond those means described in the operating
instructions. All other servicing should be referred
to qualified person.
The design of the film holder follows ISO standard.
In some cases the holes on the film will not match
exactly to the alignment of the holder. This is
caused by a non-standard camera. In this case
there will be a small black line on the edge of the
frame that can easily be cropped out using photo
editing software.