Error Message; Changing The Batteries - Grasslin talento taxxi Bedienungsanleitung

Error message

When working with the handheld programming device, it can happen that en error message appears in
the display.
• Er 3 = Time switch not recognised (name of the application is not correct)
• Er 2 = Data not correctly transferred. Repeat the transfer.
• Er 1 = Batteries not supplying sufficient voltage

Changing the batteries

1. Undo the screws
2. Replace the batteries
3. 2 x type LR 6 alkaline AA (1.5 volt)
4. Close the handheld programming device
again
20