Setup And Operation; Control And Functions; Display; Nmt Mini - IMP Pumps NMT Mini Serie Installations- Und Bedienungsanleitung

5

SETUP AND OPERATION

5.1

CONTROL AND FUNCTIONS

The pump can be controlled through a display panel and a button on it. The display shows current pump mode,
1
values and status (working/error). ER, PWM S/H models can be controlled with an external signal (separate
manual is in the box).
5.1.1

DISPLAY

There are three different display panels, NMT Mini
can be changed with a press of a button. If a pump curve is available, then the pump curve and mode symbols
will be lit. In case that there is no pump curve available, then only the symbol for pump mode will be lit.
5.1.1.1

NMT MINI

Pumps have 3 preconfigured curves of proportional pressure, constant pressure, and fixed speed modes. The lit
symbol represents the selected mode and curve.
Default view
1
Available only with Plus, Pro and WIFI model
2
Available only with basic, ER and PWM S/H model
3
Available only with basic, ER and PWM S/H model
2
, NMT Mini Plus and NMT Mini Pro
Proportional pressure
3
. Pump curves and modes
Pump modes
Constant pressure Constant speed
Pump curves
Third curve
Second curve
First curve (blue)
(orange)
(green)