RED Opticum TON-6 Bedienungsanleitung Seite 11

5. Alarm - A „Main" and „Nap" alarm are provided with independent setup along with setup for the
„Main" alarm sound and volume. In the event there is no music available form the function selected,
the radio will start beeping after one minute of silence. To use the snooze feature press the Snooze
button to silence the alarm and set a five minute Nap alarm. To silence and turn off the Alarm press
the Stand-by button.
6. Timer - A time interval can be set in 1 sec. and increase up to 99.99 sec. with a loud beeping
sound alarm when the time interval has expired
7. Language - Seventeen different languages are available for the display messages
8. Dimmer - The display brightness can be adjusted to save power
9. Display - Select the color or the monochrome for the display.
10. Power Management - To save power when the Internet connection is lost the radio will go to
Stand-by with selectable delay between 0 and 30min.
11. Sleep Timer - A delay can be setup form 15 to 180min. Before the radio goes into standby when
the Standby button is pressed.
12. Buffer - The music storage buffer used to remove short interruptions in the Internet music stream
can be adjusted from the default value of 2sec. to 4 or 8sec.
13. Weather - Option to select region, temperature units (C or F) and display this weather information
along with the time when in Standby
14. FM setup - Option to set the audio mode and adjust the scanning threshold to pick up stronger of
weaker stations.
Mode: Option to choose hearing in stereo or mono
Threshold: Option to adjust the scanning threshold to pick up stronger or weaker stations. There are
two types of threshold:
Seek Threshold: seek according to the signal strength
Stereo threshold: a stereo separation adjustment is provided in the FM receiver for lowering the
separation level of the left and right signals and approaching the mono reception to reduce the noise
when the received signal strength of the FM signal is weak, When the signal is strong, the separation
level is increased to automatically receive stereo reception. Of the „Strong" option is selected, only
the radio station with good separate level will be received (in stereo). On the contrary, if „weak" option
is selected, radio stations with low separation level will be received (in mono).
15. Local Radio setup - Option to automatically detect physical location of the radio or manual setup
to any location in the word
16. Playback Setup - UPnP playback options: repeat one, repeat All, Shuffle or turn off the feature
17. Device - Option to change the radio device name (default is AirMusic) when using DLNA and
Android App.
18. Equalizer - Option to choose from eight different sound effects
19. Resume When Power On - Enable to start playing the same function playing when the radio
turned off.
20. Software update - Display will provide information when a software is available
21. Reset to default - use this option to reset all optional setting back to the factory default value
9