level one FPS-1031 Schnellinstallationsanleitung Seite 14


IP address: 192.168.0.10

Subnet Mask: 255.255.255.0
Click Yes if you want to change IP address to the print server, and
then click Next.
For WPS-1133 (Figure 3-2 ~3-5)
Click No if you want the print server to keep using the default IP ad-
dress and keep the default Infrastructure settings:

Infrastructure mode

SSID: <ANY>

Encryption: none

DHCP client: Off

IP address: 192.168.0.10

Subnet Mask: 255.255.255.0
Click Yes if you want change wireless settings or assign a static IP
address to the print server:

On the Basic Wireless Settings screen, select Communica-
tion Type according to your network:
Infrastructure
-
Ad-Hoc
-

Enter the proper SSID of your wireless network.
Channel: optional
-
Data Transmit Rates: select Auto or others
-
Transmit Mode: select Auto or others
-

On the Wireless Security screen, enable or disable WEP/WPA
encryption, configure according to your wireless network and
click Next.

On the TCP/IP Settings screen, specify a fixed or dynamic IP
address for the print server, a fixed IP address is highly recom-
mended. Click Next.
14