Installation: Air Recirculation - GERATEK Valencia DH116B Bedienungsanleitung

II. Attach the inner chimney by tightening it using two 3*10 mm screws (s. fig.
B).
13. Insert the grease filters and connect the appliance to the mains
 Check from all sides that the appliance is aligned horizontally; otherwise the
appliance will not work properly.

2.4 Installation: Air recirculation

 If you do not use an exhaust air pipe to the outside for the installation of the
extractor hood, the exhaust hose is not required.
 The installation of the extractor hood is similar to chapter 2.3.1
I
NSTALLATION STEPS
If the socket is covered by the chimney, you must plug in the appliance at an
3
earlier point in
time.
(please ignore point 5. and point 6.).
40
3 .