Herunterladen Inhalt Inhalt Diese Seite drucken

Operating Determinations; Description; Features; Front Panel - Omnitronic ZD-1120 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

OPERATING DETERMINATIONS

This device is a professional zone distributor for distributing the incoming audio-signals to six zones. This
product is allowed to be operated with an alternating current of 115/230 V AC, 50/60 Hz and was designed
for indoor use only.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

DESCRIPTION

Features

Practical distributor
Practical distributor
• Extends every mixer in the line-sector
• 1 XLR-input
• Level-control per zone
• Twelve zone-outputs via RCA-sockets
• Every zone can be switched individually to mono
• LED-display of signal input and mono/stereo mode
• 19"-dimensions with 1 u

Front panel

(1) POWER SWITCH with POWER-LED
Press this button to start operating.
(2) LINE-CONTROL
With this control, you can adjust the LINE level.
11/14
00036055.DOC, Version 1.0

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Omnitronic ZD-1120

Inhaltsverzeichnis