Specifications - UTC Fire and Security Interlogix UVD-XP4DNR serie Kurzanleitung

Figure 2: Main menu
To access and navigate the menus, press and hold the center of the
OSD control pad. Press Up or Down on the control pad to move
between items, and press Enter (center of the control pad) to select the
item. Press Right or Left on the control pad to select the different
options available for the item.
You can return to the previous menu from any of the menus (except
the Main menu) by selecting the Previous page option.
The menu map is shown on the back page of this manual.
Refer to the User Manual for detailed programming instructions.
Table 2: Main menu options
Menu option
Preset
Setup
Viewing
Exposure
White balance
Save/Restore

Specifications

Electrical
Power Input
Power consumption
Quick Start Guide
Description
Preset settings.
Camera ID, Line Lock, motion detection, and WDR settings.
Flip and resolution settings
AGC, AE preferences, range control, shutter limit, frame
RPT, and B/W control settings.
White balance settings.
Save and restore user and factory settings.
12 VDC or 24 VAC
3W (DC); 2.4 W (AC)
7 EN