Focus Adjustment; Connect The Monitor - UTC Fire and Security Interlogix UVD-XP4DNR serie Kurzanleitung

Focus adjustment

To adjust the camera zoom and focus:
1. Zoom ring thumbscrew for VA2 and focus ring for VA9 lens.
2. Focus ring thumbscrew for VA2 and zooming ring for VA9 lens.
1. Loosen the zoom ring thumbscrew.
2. Turn the zoom ring to set the desired zoom.
3. Tighten the zoom ring thumbscrew.
4. Loosen the focus ring thumbscrew.
5. Turn the focus ring to set the desired focus.
6. Tighten the focus ring thumbscrew.

Connect the monitor

Program the cameras by attaching a standard video monitor to the
system.
To connect the monitor, do the following:
1. Plug the monitor output cable to the video monitor output
connector.
2. Connect the BNC cable to the video monitor.
3. Press the OK
Programming
The camera is configured through the setup menus which appear on-
screen. See Figure 2.
EN 6
button to display the Setup menu.
Quick Start Guide