Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Hold down the engine firmly with one hand on the frame. With the other hand grip the recoil
starter cord handle and pull slowly until resistance is felt indicating that the recoil starter is
engaged. When resistance is felt pull the cord sharply (Pic.14). Continue this procedure until
the engine starts. When the engine has been successfully started and is running smoothly
return the choke lever to the OFF position. (Pic.15)(15.1).
When the engine is running, the speed can be adjusted by moving the throttle control lever
(Pic.16) (16.1) to the high (indicated by a hare), medium or low (indicated by a tortoise).
To stop the chipper/shredder:
To stop the engine, turn the engine ON/OFF switch to the OFF position (Pic.17)(17.1).
When the engine has stopped and before storage, turn the fuel lever to the OFF position as
shown in Pic. 18 (18.1).
To shred twigs, leaves, and brush:
1. Slowly pour the material into the hopper. DO NOT try to stuff too much material in at one
time or the machine will jam.
Werbung
