Ayce PLD2372 Gebrauchsanweisung Seite 39

• Do not expose the appliance to rain or wet conditions. Water entering an appliance will
increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the appliance.
Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
• Always wear safety goggles. Safety goggles will reduce the risk of injuries.
• Disconnect the plug from the socket outlet before making any adjustments, changing
accessories, or placing the appliance aside. This safety measure prevents unintentional starting
of the appliance.
• Check the appliance, cord and plug each time before use. Do not use the appliance, if
damage is determined. Do not open the appliance yourself and have it serviced only by a
qualified repair person using only original spare parts.
Damaged appliances, cords and plugs increase the risk of electric shock.
• Provide for good ventilation of your working place. Gas and vapour developing during
working are often harmful to one's health.
• Wear safety gloves and do not touch the hot nozzle.
Danger of burning.
• Never direct the hot air jet against persons or animals.
• Do not use the appliance as a hair dryer.
than that from a hairdryer.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
OPERATIOIN
1. Before use
• Remove any packing material and loose parts from unit.
purpose.
2. Functions
Attaching a nozzle (Fig. 1)
WARNING:
Failure to unplug the tool could result in accidental starting causing possible
serious personal injury.
Fig. 1
Removing the heat protection collar (Fig. 2)
Fig.2
| 76
75
disconnected from the supply, and allowed
to cool down before changing a nozzle.
• Fit one of the four nozzles onto the heat
nozzle by inserting it on the heat nozzle
simply.
Note: Do not apply the nozzle too close
to the work piece being worked. The hot
air build-up can lead to overheating of the
appliance.
The heat protection collar can be removed
when working at particularly hard-to reach
locations.
GB