Installation - Dogtra eF-3000 GOLD Bedienungsanleitung

INSTALLATION

INSTALLATION
Fence Wire
The fence wire must make a continuous loop
around your property for your system to operate. The
signal is delivered from the terminal of the transmitter,
through the fence wire, back to the other terminal on
the transmitter. When this is accomplished, the wire
continuity light will emit a constant red indicator.
70
Wire Placement
CAUTION - Before you install your fence wire,
contact the utility company to mark the utility lines
on your property before you begin digging. Be sure
to test your wire layout above ground before
permanent installation begins.
Carefully choose the areas in which you want to
contain your dog. A diagram may be helpful in
predicting unforeseen obstacles. (Please refer to the
diagrams below.)
IMPORTANT!
When creating a Front Boundary Only, Fence
Front Yard Only, or Front Boundary with Existing
Fence type of containment system. THE TWO
PARALLEL eF-3000 GOLD WIRES MUST BE
6-10 FEET APART to avoid any signal
interference.
Please note, the diagrams are not drawn to scale.
Single loop systems must keep 6-10 feet of
distance between the wires as well.
INSTALLATION
71