e2v ARGUS 2 Bedienungsanleitung Seite 26

LEAD CONNECTED TO CAMERA
On cameras with temperature
measurement fitted, this plug is used
for the ambient temperature sensor
and is accessible without removing the
muff. Remove the sensor and plug in
the lead.
The camera should be switched on.
Run the programme (normally found
in Start>Programs>Argus>Settings)
and change the settings as desired.
After changing the settings click 'Send'
to send them to the camera.
USER CONTROL SCREEN
The following functions are available:
Zoom
This allows the user to enable/disable
the zoom function if only time and
date is desired.
Temperature Sensors
This has the option to select
Centigrade or Fahrenheit as the units
on temperature measuring cameras.
Temperature measuring may also be
turned off.
22