Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
After connecting to the network scanner is successful, launch your TWAIN-compliant
image-editing software application such as Avision Capture Tool by choosing Start>All
Programs>Avision xxx Scanner>Avision Capture Tool (xxx indicates your scanner
model).
4.
A [Select Scanner Model] dialog box appears. Choose your scanner model and click
[OK].
If there is more than one scanner on the network, a [Network Scanner] dialog box will be
prompted. Choose your desired scanner and click [OK].
5.
The main window of Avision Capture Tool appears. Press [Scan] to start scanning. In a
second, the scanned image will be displayed.
Important:
Make sure the LAN cables have been connected properly on your switching hub FIRST and
then connect the power of the Network Box. Otherwise, other computers in the network may
obtain IP address from the Network Box and therefore may not connect to the internet.
* To ensure quality support and service, please register the product from Avision's web site on
www.avision.com.
* For more detailed information about using Network Box, please refer to the user's guide of
Network Box on Avision's web site.
IP Address
5
Werbung
