EN
Configuring the gateway
2
1. Open a browser window on your PC, smartphone or
tablet.
2. In the address line, you must now enter the IP address of the
gateway in the factory set state http://192.168.0.211, then press
the Return button.
3. In the log-in window, you enter admin as the user name
and admin as the password.
Note: If no page appears after you enter the IP address, this
might be because the gateway is in a different IP address area.
For information on how to proceed in this case, please consult
the gateway start-up manual, section "Changing the network
parameters for gateway access".
Network configuration
3
You are now on the starting page of the gateway web interface. Click
on "Network configuration" in order to adapt the network settings to
your home network.