2GO H02 Bedienungsanleitung Seite 9

Turning On the Headset
Um das ausgeschaltete Headset (Modus OFF) einzuschalten (Modus
ON), halten Sie die MFB-Taste zwei Sekunden lang gedrückt, bis die
Leuchtanzeige dreimal blau blinkt.
Turning Off the Headset
In ON MODE, press and hold MFB for 2 seconds, the indicator light
flashes red for 2 times, then the headset will enter into OFF MODE
Pairing The Headset With The Cellphone
Ensure the headset is off, and the distance between your headset and
phone is within 1 meter to activate the Bluetooth function on the
phone.
Press and hold MFB for 6 seconds until the indicator light flashes red
and blue alternately as PAIRING MODE.
Search Bluetooth devices "2GO H02" (see the user guide of your
phone for instructions)
Select headset "2GO H02" from the devices list of the phone. (If the
version of the phone is or under 2.0, you should input paring code
"0000", and confirm) If successfully paired and the indicator light will
flash blue once each 4 seconds.The headset enters into the
STANDBY MODE. (If the pairing cannot be completed within 1
minutes after the PAIRING MODE has been activated, the headset
will enter into the STANDBY MODE. Please repeat above steps to do
the pairing again). Ensure there is no obstruction between your
headset and phone and within effective distance, you can use the
headset freely. If the headset has paired with your phone but
disconnected, it will pair automatically again when turned on within
operation range
Answering Call
When a call is coming, you can answer it as following ways:
Method 1: Shortly Press MFB of the Headset.
Method 2: End the call with your phone.
Ending a Call
When a call is coming, you can answer it as following ways:
Method 1: Shortly Press MFB of the Headset.
Method 2: End the call with your phone.
The Last Number Redialing
Shortly press MFB twice to redial the last phone number.
Adjusting the Volume
Press and hold "V+" /"V-" to adjust the volume to meet your need.
Disconnecting
To disconnect the paired headset from your phone, please turn off
the headset or disconnect the headset from the Bluetooth menu of
your phone. When disconnecting, you could hear "Beep" voice
prompt.