VOCO VisCalor Benutzerhandbuch Seite 34

Dispenser
Dispenser heated composite delivery system is used exceeds the applicable
RF compliance level above, the VisCalor® Dispenser should be observed to
verify normal operation. If abnormal performance is observed, additional
measures may be necessary, such as reorienting or relocating the VisCalor®
Dispenser heated composite delivery system.
b - Over the frequency range 150 kHz to 80 MHz, field strength should be less
than 10 V/m.
Recommended Separation Distances Between Portable and
Mobile RF communications equipment and the "VisCalor®
Dispenser Heated Composite Delivery System"
The VisCalor® Dispenser heated composite delivery system is intended for
use in the electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the VisCalor® Dispenser heated
composite delivery system can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the VisCalor® Dispenser
heated composite delivery system as recommended below, according to the
maximum output power of the communication equipment.
34