Introduction - VOCO VisCalor Benutzerhandbuch

Important!
PLEASE NOTE! Prior to installation and start-up of the device, please
read these instructions carefully. As with all technical devices, the
proper function and safe operation of this device depend on the
user's compliance with the standard safety procedures as well as
the specific safety recommendations presented in these Operating
Instructions.
For use by qualified professionals only!

Introduction

Congratulations on your decision to incorporate the VisCalor®
Dispenser heated composite delivery system into your practice. This
patent-pending device is the first of its kind, using NIR (near infrared)
technology to rapidly warm highly filled composite compules. With
the touch of a button, VisCalor® Dispenser is able to heat composite
material to 65°C (150°F) in seconds, and maintain that temperature
throughout the procedure.
Warming composite significantly lowers the viscosity of the material
resulting in better adaptation, reduced voids and microleakage.
Materials remain highly sculptable, non-sticky, and easily shaped
during manipulation.
The VisCalor® Dispenser is designed and manufactured by InterMed,
Inc. and distributed exclusively by VOCO.