5....-05-FST 545
•
Changing the channel setting may also be necessary in cases where reception
is not perfect.
•
On both devices the channel must be set to the same number.
z. B.
1
No Audio / Video Transmission
•
Is the mains adapter inserted?
•
Are the transmitter and receiver switched on?
•
Are the channels on the transmitter and receiver set to the same number?
•
Is the transmission source switched on?
•
Walls and ceilings reduce the range.
•
Check the connections on the connected devices.
Poor Reception Quality
•
Turn the transmitter and receiver again so that they face one another.
•
Change the position of the transmitter and receiver a little.
•
Poor reception may result from interference from other radio-transmitting devices
such as cordless or mobile telephones or CB radio.
The Remote Control does not react
•
Point the remote control exactly in the direction of the FST infrared receiver.
•
The diodes of the infrared red transmitter must be at a distance of approx. 1cm
from the infrared receiver of the device.
•
Have you aligned the IR diodes correctly?
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
24.10.2002 12:18 Uhr
Channel Adjustment
transmitter
2
3
4
CHANNEL
Rectifying Faults
Seite 19
receiver
1
2
3
4
GB
19