Denon Professional DN-300UI Benutzerhandbuch Seite 8

Weather
Select this option to set the preferences for displaying weather information.
• Set Location: Select this to set the preferred location for weather information. Choose
region, country, state, and city.
• Temperature Unit: Choose Celsius (°C) or Fahrenheit (°F).
• Show on Standby: Choose Off or On.
FM Setup
Select this option to adjust the FM radio settings.
• Mode: Choose Set Mono or Set Stereo to change the FM mode.
• Threshold: Select this to change the Seek Threshold and Stereo Threshold for the FM
radio. For each, choose Strong, Default, or Weak.
o Seek Threshold: If the station's signal strength exceeds the set threshold when
scanning, then scanning will stop at that station. If the station's signal strength does
not pass the set threshold, then scanning will continue until the next station whose
signal does pass the threshold and stop.
o Stereo Threshold: If the station's signal strength exceeds the set threshold, then it will
become stereo. If the station's signal strength does not pass the threshold, then it will
stay in mono.
Local Radio Setup
Select this option to set the local radio stations that will appear under the
in the Menu. You can choose to Manual Setup (Country), Manual Setup (City), or Auto
Select.
Playback Setup
Select this option to set the playback mode for USB playback. Choose Off, Repeat All,
Repeat One, or Shuffle.
DLNA
Select this option to set the name that DN-300UI will appear as to other devices when using
UPnP. See Menu Operation > Media Center > UPnP
Equaliser
Select this option to change the EQ setting for the audio output. Choose Normal, Flat, Jazz,
Rock, Soundtracks, Classical, Pop, or News.
Resume When Powered On
Select this option to set DN-300UI to automatically resume audio playback when powered on.
Choose On or Off.
Software Update
Select this option to check for software updates.
Reset to Default
Select this option to reset DN-300UI to its default settings.
8
for more information.
Local Radio option