Denon Professional DN-300UI Benutzerhandbuch Seite 5

Setup
Important: Connect all cables securely and properly (with stereo cables: left with left, right
with right), and do not bundle them with the power cable.
1. Use XLR cables or a stereo RCA cable to connect the Outputs (balanced or unbalanced)
to the analog inputs of your external receiver, amp, powered monitors, etc.
2. Use stereo RCA or 1/8" (3.5 mm) cables to connect any optional external devices to the
Aux In on the front or back of the unit.
3. Connect the WLAN Antenna and FM Antenna on the back of the unit, if needed.
4. After completing all the connections, use the included power cable to connect the AC In to
a power outlet.
5. Power on all of your audio sources.
6. Power on DN-300UI.
7. To connect DN-300UI to a network, press the Menu button, select Configuration and
choose Network. To have DN-300UI automatically configure network settings, select your
desired connection
Configuration, or Wireless Network (WPS PBC). To manually configure network settings,
select Manual Configuration. For wired network connections, make sure DN-300UI is
connected to your network switch or router by Ethernet cable from the RJ45 Port.
Powered Speakers
Smartphone,
tablet, etc.
ON
OFF
POWER
Items not listed under
type: Wired
FM Antenna
R L
RJ45
WLAN
OUTPUT
Router
AUX IN
Introduction > Box Contents
Network Configuration,
Zone Mixer
FM ANTENNA R L R L
TX /RX
LINK
OUTPUT AUX IN
USB Flash Drive
IR
5 V 1 A
POWER MUTE
VOL- VOL+
USB
are sold separately.
Wireless
CD Player
SLEEP MENU MODE
PUSH
ENTER
DIMMER FAVORITE ENTER
DN- 300 UI
Network
Power
VOLUME / SELECT
5