Hama 00176546 Bedienungsanleitung Seite 5

• Once the connection has been established, the lamp
stops flashing and the app confirms that your lamp was
connected. You can now give your lamp a name.
• Click Finish to complete the process.
• Now you can control the lamp.
6. Timer, automation and scenes
6.1 Timer
To access the Timer area, click the Schedule button. Here
you can program the device to turn on or off at particular
times.
• Press Add Timing.
• In the upper area, select the desired time; then select
whether you would like to execute the command
repeatedly and, lastly, whether the lamp should turn on
or off at this time.
• Confirm your programming by pressing Save in the
upper-right area.
Your finished programming is now displayed in your Timing
area, where you can additionally activate/deactivate it.
6.2 Scenes and automation
Scenes are used to control multiple devices at the same
time. With automation, tasks and settings can be automat-
ically executed based on conditions (for example, sunset at
19.00 hrs ¨ smart LED turns on).
• Press Smart in the bar at the bottom and then press + in
the upper-right area.
• You can now select whether you would like to create a
scene or an automation.
6.2.1 Scenes
• Enter a name for your scene.
• Add an action that is to be carried out. For this purpose,
all controllable devices are now listed with their
functions. You can select as many of these devices as you
like and allocate actions to them.
• To finish the scene, press Save in the upper-right area.
• The new scene is now available in your Smart area,
where you can run it.
5