Intermec AC18 Anleitungen Seite 4

2 Connect one end of the power cord to the AC adapter and the
3 Insert the battery pack into any bay on the charger. The
4 Charge the battery pack for at least 4 hours.
Understanding the Charging Status LEDs
LED Color
Off
Solid red
Blinking red
Solid green
Caution: See Compliance Insert for use restrictions
associated with this product.
Input voltage: 12 VDC
4
other end to an AC power outlet.
charging status light next to the battery turns on after two to
three seconds.
Description
No battery installed in charger.
The battery is charging.
The battery charger is experiencing a charging
error. Remove the battery for 10 minutes and
then reinsert it into the charger. If the charger
still shows an error, the battery may be
damaged. Replace the battery.
The battery is completely charged.
4-bay battery charger
Charging status
light