Technical Data, Markings On The Hand-Operated Lifting Magnet - Alfra Tmh 50 R Bedienungsanleitung

Technical data
Prod.-No.:
Designation:
Pull-off strength:
Max. load-bearing capacity:
(on flat material
with safety factor >3:1)
Max. load-bearing capacity:
(at 90° inclination of the load
with safety factor >3:1)
Max. load-bearing capacity:
(on round pipes at 0° inclination)
Admissible diameter of
round pipes:
Dead weight of the unit:
Storage temperature:
Operating temperature:
Markings on the hand-operated lifting magnet
Detailed descriptions for handling and operating conditions of the TMH 50
lifting magnet. This labeling must not be modified, damaged or removed. Otherwise the manufacturer cannot be
held responsible for any personal injuries, property damage or accidents resulting from this fact. New labels must
be ordered from the manufacturer if necessary.
Prod.-No.: 189414231.ROHR
41100.H.R
TMH 50 Hand-operated lifting magnet
R
>270 kg from 6 mm S235
50 kg from 3 mm S235
35 kg from 3 mm S235
20% - 50% of the breakaway force
25 mm - 200 mm
1.6 kg
-30°C to +60°C
-30°C to +60°C
>594 lbs from 0.25"
110 lbs from 0.12"
75 lbs from 0.12"
20% - 50% of the breakaway
-22°F to +140°F
-22°F to +140°F
can be found on the upper side of the
R
Prod.-No.: 189414256
force
1" - 8"
3.6 lbs
14