aidapt VR202 Gebrauchs- Und Wartungsanleitung Seite 3

ADJUSTMENTS TO HEIGHT/WIDTH EXTENSION LEGS
Remove the 'E' clip from the extension leg and extend all four legs evenly to the
•
desired height ensuring you do not exceed the last punched hole of the extension
leg. (see fig. 1)
Once you have achieved the desired height; reinstall the 'E' clip, ensuring that it has
•
passed through the extension leg and is fitting neatly and snug around the outside
leg. (see fig. 2).
Never install the extension legs unevenly or slanting, this will compromise the
•
safety of the user.
Repeat the process for the width adjustment bars.
•
Fixing and Maintenance Instructions
3
Ver.4 08/2012 (1569)