Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
•
Freed manually the ribs before opening the first time. Never force the ribs.
•
Push slider car (8) up a little so that crank is in confortable height. E) Pull on slider
car stop Pin (6), rotate 90 ° in vertical position, slider car is now free. Push slider
car (8) slightly upward. Turn the Stop Pin (6) back into horizontal position, push-in
knob, slider car is blocked.
•
Turn crank (26) clockwise until shade roof is fully tight and open.
•
J) To rotate the umbrella, just lift the turning handle (3), turn umbrella in required
position and lower the handle to lock the mast.
•
K) Unscrew the adapter (25) on the slider (21) to fix the optional LED-light (L).
Tilting of shade roof
•
M,N) The shade roof can be tilted individually in different angles of inclination.
There is a teeth belt along the rail of mast profile integrated. Following steps are
required to tilt:
•
E) Pull slider car stop PIN out (6), rotate 90 ° in vertical position, slider car (8) is
now free and the shade roof can be pushed/pulled up or down.
•
To lock the slider car, turn the slider car stop Pin (6) to vertical position, press-in
knob, slider car is locked in the teeth belt. Shade roof is now fixed.
•
The manipulation is always the same as above, to lower shade roof from hori-
zontatal (M) downwards in any of the tilted position (N) or reverse to horizontal
position.
Closing:
•
Pull slider car (8), depending on the position down, rsp. push slightly upwards, until
the crank (26) on a pleasant level.
•
Turn crank (26) counter clockwise to close shade roof.
•
Pul slider car (8) if necessary all the way down. Pull out E) slider car trop PIN
on the slider (6), rotate 90 ° in vertical position, slider car is now free and can be
completely pulled down. Rotate knob in horizontal position, push in knob to allow
blocking of slider car.
•
Avoid clamping, abrasion and premature wear and tear of fabric. Pull out the fabric
individually and completely between the ribs, apply the layers tight around the pole
and secure with the strap. The fabric should not flap in the wind.
•
Use the protective cover to protect your fabric and prolong the life of the canopy.
Werbung
Inhaltsverzeichnis
