Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety regulation
•
Installation has to be conform the manual. Disregard or change of installation can
result on serious damages to people and material for which the manufacturer refu-
ses to accept any liability or obligation under warranty.
•
The windresistance of an open umbrella is limited and related of the anchoring.
Movable base are less stable than installation fixed to the ground.
•
The ground anchorage has to be fitted accoriding the related fitting instruction.
Fitting has to be carried out by a specaialist with construction know-how.
•
The umbrella must not be altered or draped with a different material. Stability,
function and/or closing mechanism may deteriorate.
•
Use only original accessory and spare parts from Shademaker.
•
If the wind freshens up the sunshade must be closed.
•
Unattended sunshades must not be left open!
Installation:
•
Due to the weight of the umbrella, are at least two person required for the installa-
tion.
•
C) Lift complete umbrella including the support tube (1) with two people onto the
fixation (eg.base, In-ground), insert four anchorage screws (30), do not tighten yet.
Lift turning handle (3) to turn the mast, now place the fifth anchorage screw.
•
Adjust umbrella to the required position and tighten the anchorage screws (30).
•
In case umbrella does not stand vertical, loosen the anchorage screws (30) slightly
and adjust with level screws (31) and retighten the anchorage screws.
•
Tighten the crank (26) with allen-key onto the winder meachanism (9)
•
D) Open zipper on protective cover. Stick together the the aluminum rods, slip the
whole srod into the pockets next to the zipper. Protectvie cover can now be lifted
over the umbrella easily.
GB
Werbung
Inhaltsverzeichnis
