Modifying Schedules; Maintenance; Error Log - Whirlpool-Agentur Explorer Gebrauchsanleitung

1
Keypad functions

Modifying schedules

To modify a Water Care category, touch the pen icon at
the right end of the desired watercare to open the selected
Water Care menu�
Touch the Economy tab to change the economy setting
and filter cycle tab for the filtration settings (or schedules)�
You can add economy or filtration schedules by touching
the « + » symbol �
To delete a schedule, touch the garbage can icon at the
right end of the desired line�
You can modify the programmed schedules by selecting
one and adjusting the schedule�
You have several possibilities for the schedule (Mon-Fri,
weekend, every day, or single days)� The schedules will
be repeated every week� The time and duration are set in
30 minute increments� Once you have set the schedule,
use the calendar icon to go back� Ensure that you have
selected the desired Water Care mode in the main Water
Care menu�

Maintenance

From the Maintenance page you can access the following:

• Error log

• Reminders
To acces the desired option simply touch the desired
menu item�
Error Log
In this section you can see errors that have been archived
by the system� Drag the list Up and Down to move through
the list� Errors are archived chronologically, from the most
recent at the top to the oldest at the bottom�
The Error log page shows the error code, the date
of the error, and the time� Touching the garbage can icon
will delete the Error log (with a confirmation)�
For more information, see the Error messages section�
15