Shipment And Repositioning; Before Calling Your After Sales Service - Kernau KBC 08122 Bedienungsanleitung

Transportation and changing of installation position
• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick packaging, bands or strong cords and
follow the instructions for transportation on the package for re-transportation.
• Remove movable parts (shelves, accessories, vegetable bins etc.) or fix them into
the fridge against shocks using bands during re-positioning and transportation.

BEFORE CALLING YOUR AFTER SALES SERVICE

If your refrigerator is not working properly, it may be a minor problem, therefore
check the following.
The appliance does not operate, Check if;
• There is a power failure,
• The mains plug is not properly plugged in, or is loose
• The thermostat setting is on position «•»,
• The socket is defective. To check this, plug in another appliance that you know
which is working into the same socket.
The appliance performs poorly; Check if;
• You have overloaded the appliance,
• The door is not closed perfectly,
• There are not enough ventilation ducts in the kitchen unit as mentioned in the in-
stallation manual.
If there is noise;
• The cooling gas which circulates in the refrigerator circuit may make a slight no-
ise (bubbling sound) even when the compressor is not running. Do not worry, this
is quite normal. If these sounds are different check if;
• The appliance is installed firmly as described in the installation manual.
• Objects on the appliance are vibrating.
If there is water in the lower part of the refrigerator; Check if;
• The drain hole for defrost water is not clogged (use defrost drain plug to clean the
drain hole).

SHIPMENT AND REPOSITIONING

EN
21