iCES IBT-3 Bedienungsanleitung Seite 18

Notes:
1. When the Bluetooth icon on the display flashes, means the speaker is
searching the previous paired device.
2. Press play/pause button and hold for 10 seconds, the Bluetooth icon on the
display will flash fast, which means the speaker is ready for being paired.
3. After paired sucessfully, the Bluetooth icon on the display will be on.
USB port for charging
USB port for charging, does not support any media feature.
USB power output DC5v 2.1A.
USB port for playing MP3
1. Power on the unit and insert a USB Flash Drive (not supplied) into the USB
Port, ensuring the plug is fully inserted at the correct way.
2. The tower will play music from the USB automatically or press "MP3" button
on the remote. The maximum size of Flash Drive that can be connected is
8GB max.
SD card slot for playing MP3
1. Insert an SD or MMC memory card (not supplied) into the memory card
expansion slot. Make sure it is inserted at the correct way.
2. The tower will play music from the SD card automatically or press "MP3"
button at the remote
Playing the FM radio
1. Press the "STANDBY" button to turn the unit on,.
2. Ensure the FM Antenna has been fully extended and press "Mode" to adjust
to "FM" mode or press "FM" button on the remote.
3. Press the "Skip forward" and "Skip backward" to select the desired FM radio
station. Press "Skip forward" or "Skip backward" and hold, the unit will scan
the readio station, and stop once found one.