Remote Control - RUSTA 92201069 Gebrauchsanweisung

ENG

REMOTE CONTROL

PREPARATION FOR USE
Remove the plastic and insert the battery.
LINKING YOUR TRANSMITTER TO A RECEIVER
1. Press on a button on the left side that you want to link
(1, 2, 3, 4). With this the LED of the receiver is on.
2. Switch your receiver in the linking mode, follow the
manual of the receiver.
OPERATING A REVEICER
Press the left and right buttons (1, 2, 3, 4)
to switch on and off all receivers separately.
DISCONNECTIONG A LINK
1. Switch your receiver in the linking mode,
follow the manual of the receiver.
2. Press on button on the right side that you want
to unlink (1, 2, 3, 4). With this the LED of the
receiver is off.
4
ON
OFF