NEILPRYDE RS:One Montageanleitung Seite 16

4. Remove the mast from the sail,
this can be done by taking a
screw driver and pushing trough
the de-rigging loop in the top of
the sail, this will hold the sail in
place while pulling the mast out.
By following this step-by-step Rigging Guide, the durability of your sail is greatly increased.
no "wrinkling" of the
As the mast is not thread directly onto the cambers, there is
monofilm during Rigging or De-Rigging.
If you have any questions with regards to the rigging of your sail, please ask our Technical
www.neilpryde.com
Experts directly on the Support desk:
17