Seite 1
Aufbauanleitung / assembly instructions mod. 3772 - 3775 mit Frontauszug / with front extension M8 x 25 M8 x 65 1.Montagematerial. 2. Den Oberbau umgedreht auf gepolsterten 1. Fitting material. Montageböcken ablegen. 2. Put the table top upside down onto padded assembling trestles.
Seite 2
6. Auf der Auszugsseite die beiden Tischbeine mit je 2 Schrauben (M8 x 25) fixieren. 6. Fix two table legs with each 2 screws (M8 x 25) at the extension side. 2 / 7 3772 - 3775 mit Frontauszug Änderungsdatum: 15.03.19...
Seite 3
4 Tischbeine auf dem Boden absetzen. 7. Turn the table right-side-up without using the feet. Then put the table down on all 4 feet at once. 3 / 7 3772 - 3775 mit Frontauszug Änderungsdatum: 15.03.19...
For this purpose the nut extenson-rod again. (SW13) can be loosened. Adjust the extenson-rod by turning the inner socket screw. Then tighten the nut of the extenson- rod again. 4 / 7 3772 - 3775 mit Frontauszug Änderungsdatum: 15.03.19...
12c. Swing out the table-extension by using the 12c: Die Klappeinlage mit dem Ledergriff aus- leather belt. Check the hight again; if klappen, die Höhe rechts erneut kontrollie- necessary adjust again. ren und wenn nötig erneut einstellen. 5 / 7 3772 - 3775 mit Frontauszug Änderungsdatum: 15.03.19...
13c. Swing in both pieces of the table-extension at the same time. Use the leather-belt to swing out the table- extension and check the hight again. If necessary, adjust again. 6 / 7 3772 - 3775 mit Frontauszug Änderungsdatum: 15.03.19...
Seite 7
14. Fertiger Tisch; nicht ausgezogen. 14. Finished table; not extended. 15. Fertiger Tisch; ausgezogen. 15. Finished table; extended. 7 / 7 3772 - 3775 mit Frontauszug Änderungsdatum: 15.03.19...