auna multimedia AUNA LivingQube Handbuch Seite 9

Turning on/off the unit
Position the unit at the desired location. Unravel the power cord and insert the cord into power port.
Make sure the power plug is properly connected. The Standby indicator will be on, press the power/
mode button on the top panel to turn on the unit, press and hold to turn off the unit.
Operating mode selection
Press the power/Mode button on the top panel of the unit to select the source between the Bluetooth/
Aux mode. The corresponding indicator lights up when it is selected. Blue light indicates the product
in Bluetooth mode; green light indicates the AUX in mode.
Volume +/- Button
Press the VOLUME - / + Button on the main unit to adjust the sound level to the desire level.
Using Bluetooth fuction
Your Bluetooth device (iPod/iPad/iPhone or the Smart phone, MP3 player, computer, etc) must sup-
port the A2DP Bluetooth profile to match this speaker. For accurate information about your product,
please refer to your Bluetooth device's manual book for details on the Bluetooth profiles it supports,
and how to set the device's Bluetooth pairing/Searching/Setup mode.
• Press the standby/on button on the unit to switch on the speaker, the speaker will enter into Blue-
tooth mode, the blue indicator will flash, which indicates Bluetooth source mode is effective.
• The speaker will search the pre-paired device, if it could not find it in 30 seconds, the blue LED
indicator will flash quickly, which means the speaker is ready to be paired with a new device.
• Activate the Bluetooth on your device according to the device's user manual, turn on the Bluetooth
connectivity and make your device "discoverable".
• For Apple iPhone select Settings, General, Bluetooth and wait for the iPhone to search for the de-
vice.
• The blue LED flashes to indicate pairing operation, your Bluetooth device should search and find
the device name "Please advise the BT pairing name", and then pair it.
• Press the PLAY/PAUSE button and hold on the speaker to search Bluetooth device if it is needed.
• Once paired with a device, the Bluetooth light will stop flashing and glow steadily, this indicates
successful pairing and the speaker is connected.
• Now you can play music from your iPod/iPhone or mobile phone through the Bluetooth speaker.
• Adjust the volume by adjusting the control on the speaker or the Bluetooth device.
• If the pairing is unsuccessfully, re-pair your Bluetooth device with the speaker, by repeating the
above steps.
• When it is not being used for a long period of time, please turn off the speaker.
AUX-In Modus
Connect the Audio Output jacks of your auxiliary sound source (TV, VCR, DVD Player, MP3 player,
Cassette Deck, Mini Disc Player, etc,) to the AUX in socket at the back of the unit, The auxiliary func-
tion will only be supported when the AUX in jack has a suitable sound source connected via an AUX
in cable.
• Press the power/mode button on the top panel to power on the unit.
• Once the AUX in cable is connected with your audio device and your speaker system, turn your
auxiliary source 'On' and operate it as usual.
• Press the power/mode button on the unit to select AUX in function. The green LED indicator will be
on. The sound from the auxiliary source will be heard through the speakers of this system.
Basic Operating Instructions
9